image image image image image
Our Dreams to Change The World We want to contribute to the world, not only with the product but also with the attitude, discipline, honor, and etc. That's why we want our dreams to change the world with all of we can do, because we want to be the best.
Improve to Makes Good Products Our purpose is to make satisfaction for customer. Many ways we have change with the best we can do, just to improve our product, to makes a good product. Because we want to be the best in Indonesia.
Available in Various Shapes and Characteristics PT FUMIRA have various shapes and characteristics in order to fulfill the need of our customers. PT FUMIRA products can change depends on  
International Standard Quality In order to make customer believes about PT FUMIRA product, our company have international sertificates of quality products. There are SAI Global in requirements of AS/NZS ISO 9001:2008 and IQNet in the same field.
Quality Satisfaction Guarantee PT FUMIRA very concern about quality product. This means that every product must be past the quality control in order to give satisfaction for customers. The customers must be proud of the product PT FUMIRA when they use them, because the product is and will allways be quality Satisfaction Guarantee.

Material and Process

Raw Material

The galvanized steel sheets are full hard (unannealed) Cold Rolled Steel Sheet in Coil (CRC) with the specification of SPCC-1D (JIS F3141 SNI.07-3567-1995). PT Fumira has developed certain processing cycles to transform the raw material into galvanized sheets meeting the commercial, drawing and structural quality standards.

 

anealing Annealing

The raw material is uncoiled and passed through a preheating furnace where it is fired and the surface is cleansed from oils and impurities. It is then annealed continuously in the Non-Oxidizing Furnace (NOF) to a desirable quality at a temperature of 1200 0C.

 

 

hot Hot Dip Galvanizing Process

The cleaned and fired raw material is then hot dipped into a zinc bath. The process avoids exposure any oxygen in the air, in order to prevent the surface oxidation that can result in a poor quality of zinc coating. The coating of the zinc on the surface is controlled by Air Jet Wiping (AJW) to ensure uniform thickness and spangle.

 

skin Skin Pass

The galvanized stell sheet strip is rolled between two rolls specifically shaped to form a super smooth surface that can be paint perfectly.

 

 

 

skin2 FUMIRAFRIP SP-1 thickness is between 0.20-1.20 milimeters and with a width up to 1,250 milimeters. As evidence of this advance proces, the surface of the galvanized skin pass sheet strip satisfactorily fulfills the standards demanded by white household goods and the automotive industry.

 

 

surface Surface Treatment Process

After the hot dip process, the tension leveler is used to improve the evenness of the galvanized sheet. A liquid chromate treatment is then applied to the zinc-coated surface to give it a protective lining and prevent rust.